GSMDEC | Foro de Telefonía celular

Sopote de Cajas y Dongles => NCK DONGLE => Mensaje iniciado por: Jaqen H'ghar en Agosto 23, 2019, 01:01:55 PM

Título: ¡¡¡Aporte Lanix LT520 FRP - Cuenta Google by NCK!!!
Publicado por: Jaqen H'ghar en Agosto 23, 2019, 01:01:55 PM
1.- Abrir NCK modulo MTK.
2.- Elegir el modelo MT6737M.
3.- En la sección Custon DA Loader cargar el adjunto,
4.- Dar reset FRP y conectar apagado.

CitarExe version: NCKBox AndroidMTK 2.0
Selected model: 0-By CPU  MT6737M
[auto]Action: Reset FRP
Will be used loader: recovery L620.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM4)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB  DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A483847346132 : 00000000000000
EMMC UA SIZE: 0x1d2000000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000      [7.293 GB]
Checking data, wait...

writing para!
Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
  • All done.