- Bueno lo unico que debemos hacer es poner el telefono en Factory Mode desde FastBoot
- Lo conectamos a la PC, abrimos Octoplus FRP Tool, y clic en Reset FRP, y solo esperar, ya que hace todoCitarPlatform: MOTOROLA
Selected model: XT1670
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8937.gen
Firmware released date: Mar 22 2017
Firmware released time: 21:15:58
Firmware compiled date: Mar 13 2017
Firmware compiled time: 23:00:00
SW version: MPSS.JO.2.0.c1.8-00016-8937_GENNS_PACK-1
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: motorola Moto G (5)
SW version: NPP25.137-72
Date: Thu Apr 20 07:07:43 CDT 2017
Android version: 7.0
Baseband M8937_11.16.02.51R CEDRIC_LATAM_CUST
Detected phone model: XT1670
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.0.5 Software version.
PD. Si no se reinicia en automático, lo hacemos manualmente
CitarWelcome to Octoplus FRP Tool v.1.2.3
Platform: MOTOROLA
Selected model: XT1670
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8937.gen
Firmware released date: Mar 22 2017
Firmware released time: 21:15:58
Firmware compiled date: Mar 13 2017
Firmware compiled time: 23:00:00
SW version: MPSS.JO.2.0.c1.8-00016-8937_GENNS_PACK-1
Enabling "USB Debugging" mode...
Searching for a phone. Please wait...
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: motorola Moto G (5)
SW version: NPP25.137-82
Date: Fri Aug 4 05:53:52 CDT 2017
Android version: 7.0
Baseband M8937_11.16.02.51R CEDRIC_LATAM_CUST
Detected phone model: XT1670
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.2.3.0 Software version.
Uno mas... las instrucciones son las mismas de este tema: http://www.gsmarena.com.mx/index.php?topic=1382.0
(https://www.imgs.gsmarena.com.mx/images/2018/10/04/XT1670.png)