GSMDEC | Foro de Telefonía celular
Sopote de Cajas y Dongles => FURIOUS GOLD => Mensaje iniciado por: Zilre en Diciembre 06, 2017, 06:46:45 PM
- El proceso es con el Pack 6 y el modulo OTSmart_v1.0.0.2580
- Elegimos el modelo ZTE Blade A410 / Elegir FRP Reset y conectamos apagadoCitarUsing library Brom_DLL_v7.1522.2
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM16))
Preparing to start flash mode;
Preparing to open COM16
Connecting;
Downloading DA;
Initializing;
Rid: dbb30f26cce6ed32a915a667c644e59f
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;
Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver\x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;
DA_HIGHSPEED_VCOM (@oem85.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM20;
DEVICE INFO:
BB CHIP: MT6735M_S00 [CA00, 00, 335, FF]
HW_STORAGE_EMMC: 0x46000115 0x4D323237 0xFFE30042 0x61832990 [SIZE=0x1D2880000]
IMEI1 [OTP 0000]: 0:
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xC4000000 SIZE: 0x10CF80000
Factory Reset Protection successfully removed !
Time needed - 00:00:00
Log file saved to: LOG_6_12_2017_18_40_01.txt