¡¡¡Aporte Hisense L675 PRO FRP - Cuenta Google By NCK!!!

[Jaqen H'ghar]

1.- Equipo apagado.
2.- Abrir NCK en la plataforma Android MTK.
3.- Ir a las opciones de Reset.
4.- Elegir en Phone Setting Hisense y F23.
5.- Dar en Reset FRP y conectar el equipo.
6.- Ahora solo toca esperar.

Exe version: NCKBox AndroidMTK 1.8.8.8
Selected model: F23
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB  DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A483847346132 : 00000000000000
EMMC UA SIZE: 0x1d2000000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000      [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM20)
-Reading GPT Drive OK
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.