¡¡¡Aporte ZTE Blade L5 FRP - Cuenta Google by NCK!!!

Iniciado por Zilre, Octubre 19, 2017, 06:41:32 PM

Tema anterior - Siguiente tema

0 Miembros y 1 Visitante están viendo este tema.

Zilre

- Como sabemos debemos instalar los Drivers MTK
- Abrir NCK Android MTK y elegimos el procesador que es MT6572
- Pestaña FRP y clic en Reset FRP


CitarExe version: NCKBox AndroidMTK 1.8.8.2
Selected model: MT6572_EMMC
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM5)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 1.
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB  DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48384731 : 000000000000000000
EMMC UA SIZE: 0x1d2000000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000      [7.293 GB]
Preloader SEC version: 2
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.

Jaqen H'ghar

En lo personal durante el proceso la pantalla se puso en blanco y parpadeo pero terminando el proceso cuenta eliminada y celular al 100, solo lo comento por si a alguien le pasa no se asuste.

CitarExe version: NCKBox AndroidMTK 1.8.8.8
Selected model: MT6572
Action: Reset FRP

Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB  DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A483847316505 : 00000000000000
EMMC UA SIZE: 0x1d2000000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000      [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM20)
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.