¡¡¡Aporte ZTE A465 Unlock - Liberacion by NCK Dongle (Sin Root)!!!

Iniciado por Zilre, Noviembre 15, 2017, 07:56:17 PM

Tema anterior - Siguiente tema

0 Miembros y 1 Visitante están viendo este tema.

Zilre

- Abrir NCK Android MTK y elegimos el modelo
- Nos vamos a la pestaña Unlock y usamos el metodo FLASH mode


CitarSelected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.8.2
Selected model: Blade A465
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM5)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 2.
----------------------------------------------------
BaseBand CPU :MT6735M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB  DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x513732534d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010051373253 : 000000000000000000
EMMC UA SIZE: 0x1d2000000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000      [7.290 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
IMEI[1]: ----
IMEI[2]: ----
Reading security, wait...
SIM[1]:
Block1(N): Unlocked
(remain:5) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Unlocked
(remain:5) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
  • Unlock finished.
    [1]Unlock finished.
    CHK updated ok.
    Wait untill phone will start charging.
    All done.

Jaqen H'ghar

Citar
Exe version: NCKBox AndroidMTK 1.9
Selected model: Zte  Blade A465
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM536)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB  DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x513732534d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100513732534D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000      [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM554)
IMEI[1]: ***************
IMEI[2]: ***************
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:5) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Unlocked (remain:5) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
[2660]Unlocking target...please wait
  • Unlock finished.
    [1]Unlock finished.
    CHK updated ok.
    Wait untill phone will start charging.
  • All done.