¡¡¡Aporte Huawei Y221 (Y221-U03) Unlock by Nck Box!!!

Iniciado por Zilre, Mayo 05, 2018, 07:54:04 PM

Tema anterior - Siguiente tema

0 Miembros y 1 Visitante están viendo este tema.

Zilre


CitarSelected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.8.7
Selected model: Ascend Y221-U03
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM3)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB  DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 90014A483447316404 : 00000000000000
EMMC UA SIZE: 0xe9000000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000       [3.652 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : DA USB VCOM Port (COM5)
IMEI[1]: 865247021550505
IMEI[2]: 865247021550505
Reading security, wait...
SIM[1]:
Block1(N): Unlocked (remain:255) Code : 11119673
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Unlocked (remain:255) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
[3260]Unlocking target...please wait
  • Unlock finished.
    [1]Unlock finished.
    CHK updated ok.
    Wait untill phone will start charging.
    All done.