¡¡¡Aporte ZTE Blade V6 Plus FRP - Cuenta Google By NCK!!!

Iniciado por Jaqen H'ghar, Mayo 10, 2018, 12:53:31 PM

Tema anterior - Siguiente tema

0 Miembros y 1 Visitante están viendo este tema.

Jaqen H'ghar

1.- Celular apagado.
2.- Abrir NCK en el modulo Android MTK.
3.- En Phone Setting poner ZTE y Blade L3 Lite.
4.- Ir a la pestaña FRP-Pattern-Privacy.
5.- Dar clic en Reset FRP.
6.- Conectar y listo.


CitarExe version: NCKBox AndroidMTK 1.8.8.8
Selected model: Blade L3 Lite
Action: Reset FRP

Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB  DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x513331334d42
EMMC FW VERSION: 06:00:00:00:00:00:00:00
EMMC CID: 150100513331334D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000      [14.572 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM20)
-Reading GPT Drive OK
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.

Jaqen H'ghar

Segundo hecho

CitarExe version: NCKBox AndroidMTK 1.8.8.8
Selected model: Blade L3 Lite
Action: Reset FRP

Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB  DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x513331334d42
EMMC FW VERSION: 06:00:00:00:00:00:00:00
EMMC CID: 150100513331334D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000      [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM20)
-Reading GPT Drive OK
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.