GSMDEC | Foro de Telefonía celular

Sopote de Cajas y Dongles => NCK DONGLE => Mensaje iniciado por: Jaqen H'ghar en Marzo 31, 2018, 01:35:39 PM

Título: ¡¡¡Aporte Alcatel 4047A FRP - Cuenta Google By NCK!!!
Publicado por: Jaqen H'ghar en Marzo 31, 2018, 01:35:39 PM
1.- Celular Apagado.
2.- Abrir NCK modulo MTK.
3.- En Phone Setting elegir MT6580.
4.- Ir a las opciones de FRP-PATTERN-PRIVACY-RESET.
5.- Elegir Reset FRP y conectar, esperar y listo.

CitarExe version: NCKBox AndroidMTK 1.8.8.4
Selected model: MT6580
Action: Reset FRP

Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 1.
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB  DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x464536324d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 15010046453632 : 000000000000000000
EMMC UA SIZE: 0x3a3e00000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000      [14.572 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.
Título: Re:¡¡¡Aporte Alcatel 4047A FRP - Cuenta Google By NCK!!!
Publicado por: Jaqen H'ghar en Junio 26, 2018, 10:18:54 AM
CitarExe version: NCKBox AndroidMTK 1.8.8.8
Selected model: MT6580
Action: Reset FRP

Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB  DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x464536324d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100464536324D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000      [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM20)
-Reading GPT Drive OK
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.