¡¡¡Aporte LG K500MM Unlock by Octopus!!!

[Zilre]

Instrucciones de Unlock del LG K500MM usando Octopus

En este caso el equipo tiene Android 10 >> SW version: LMK500MMAT-02-V10i-310-160-JUL-16-2020-ARB00+0

- Abrir Octopus Box LG, elegir el modelo K500MM
- Clic en Unlock y cuando lo pida, presionar Volumen Arriba y conectar USB
- Y solo esperar que se termine el proceso

PD. Ocupamos 100 créditos - Full señal, mensajes, llamadas y datos

[Zilre]

--------------------------------------------------------------------------------
Selected USB connection type
Work ID: 0000000000550C8F
Checking data...OK
Platform: LG MTK
Selected port: COM1
Selected baudrate: 921600
Selected model: K500MM
Please, disconnect cable, power phone OFF, connect P999
cable (with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and
connect USB cable.
Phone found at port COM47
Mode: Emergency
Initializing flash...OK
Model ID: LM-K500MM
Platform: mt6765
Android version: 10
SW version: LMK500MMAT-02-V10f-310-160-JUN-10-2020-
ARB00+0
LAF Version: 1.1
Product ID: VS03S200620004923
IMEI: 354544-11-318787-5
Target operator: LAO
Hardware: rev_10
Battery level: 50%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI: 354544-11-318787-5
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Write security backup function doesn't work for this device
with latest firmware versions. If you'll encounter any problem
during Unlock operation - you won't be able to restore the
phone to it's initial state, so proceed at your own risk.

Continue?
Creating EEPROM backup...OK
Initializing flash...OK
Reading security area...
Backup saved to "K500MM_354544113187875_28-12-2020_
16-08-46.EEP"
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: daniunlock
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 100 credits.
To perform "Unlock" operation you need to have 100 credits.
Unlocking...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Removing write protection...OK
Initializing flash...OK
Reading partitions...OK
Erasing part 1...OK
Initializing flash...OK
Erasing part 2...OK
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Restore write protection...OK
Initializing flash...OK
Reading partitions...OK
Phone successfully unlocked!
Warning: If your device were stuck at logo, after operation was
completed, then please, don't reflash your device, first contact
with Support via Skype or create thread at forum!
Performed by 3.0.7.08 Software version.