GSMDEC | Foro de Telefonía celular

Sopote de Cajas y Dongles => NCK DONGLE => Mensaje iniciado por: Jaqen H'ghar en Enero 14, 2018, 01:41:20 PM

Título: ¡¡¡Aporte Motorola XT1764 - Moto E (4) FRP - Cuenta Google by Nck!!!
Publicado por: Jaqen H'ghar en Enero 14, 2018, 01:41:20 PM
1.- Abrimos el modulo AndroidMtk.
2.- Ir a Reset FRP.
3.- Modelo MT6571_EMMC.
4.- Conectar celular apagado y esperar a que el celular empiece a cargar.

Citar
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM60)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735M_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB  DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514536334d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 15010051453633 : 000000000000000000
EMMC UA SIZE: 0x3a3e00000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000      [14.572 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM66)
Checking data....wait!

FORMAT EMMC FLASH :  BEGIN: 0x9c80000        - LEN: 0x100000       
FRP Reset Done.
Wait untill phone will start charging.
All done.[
/quote]
Título: Re: ¡¡¡Aporte Motorola XT1764 - Moto E (4) FRP - Cuenta Google by Nck!!!
Publicado por: Jaqen H'ghar en Mayo 16, 2018, 11:12:58 AM
CitarExe version: NCKBox AndroidMTK 1.8.8.8
Selected model: MT6571
Action: Reset FRP

Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB  DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514536334d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100514536334D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000      [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM20)
-Reading GPT Drive OK
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.