GSMDEC | Foro de Telefonía celular
Sopote de Cajas y Dongles => OCTOPUS BOX => Octoplus FRP Tool (Octopus FRP Tool) => Mensaje iniciado por: Zilre en Diciembre 11, 2017, 07:18:53 PM
- Poner el Telefono en Modo Factory Mode desde FastBoot
- Abrir Octopus FRP Tool y elegir el modelo XT1602 y clic en Reste FRP
- El software va ha reiniciar el Telefono y en automatico se instala ABD y es todoCitarWelcome to Octoplus FRP Tool v.1.0.4
Platform: MOTOROLA
Selected model: XT1602
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: EAAAANVZ
Firmware released date: Sep 11 2017
Firmware released time: 07:46:39
Firmware compiled date: Sep 05 2017
Firmware compiled time: 22:00:00
SW version: MPSS.DPM.2.0.2.c1.21-00008-M8936FAAAANUZM-1.80536.1.114889.1
Enabling "USB Debugging" mode...
Searching for a phone. Please wait...
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: motorola Moto G Play
SW version: MPIS24.241-15.3-26
Date: Mon Sep 25 05:38:02 CDT 2017
Android version: 6.0.1
Baseband M8916_20250106.08.05.14.02R HARPIA_LATAM_DSDS_CUST
Detected phone model: XT1601
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.0.4 Software version.