GSMDEC | Foro de Telefonía celular

Sopote de Cajas y Dongles => NCK DONGLE => Mensaje iniciado por: Zilre en Diciembre 04, 2017, 05:23:24 PM

Título: ¡¡¡Aporte Alcatel 5010S Unlock - Liberación by Nck Dongle!!!
Publicado por: Zilre en Diciembre 04, 2017, 05:23:24 PM
- Abrir Android Mtk NCK y elegimos el modelo en cuestión y solo Unlock mediante Flash Mode

CitarSelected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.8.3
Selected model: OT-5010S
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 1.
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB  DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
EMMC FW VERSION: 06:00:00:00:00:00:00:00
EMMC CID: 150100464E5832 : 000000000000000000
EMMC UA SIZE: 0x1d2000000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000      [7.290 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
MODEL FROM PROINFO: 5010S-2VUFMX1
SECRO FROM PROINFO: X5E0OF00BS10
OTP IMEI:
OTP IMEI:
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:100) Code : 0959584467901623
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Locked (remain:100) Code : 5012173894527032
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
  • Unlock finished.
    [1]Unlock finished.
    Wait untill phone will start charging.
    All done.
Título: Re:¡¡¡Aporte Alcatel 5010S Unlock - Liberación by Nck Dongle!!!
Publicado por: Jaqen H'ghar en Agosto 27, 2018, 07:50:06 PM
CitarSelected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.9.2
Selected model: OT-5010S
Action: Unlock

Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM132)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB  DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x463732324d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100463732324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000      [7.290 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM445)
MODEL FROM PROINFO: 5010S-2AUFMX1
SECRO FROM PROINFO: X5E0OF00BS10
OTP IMEI: ***************
OTP IMEI: ***************
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:84) Code : 5394931482209758
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Locked (remain:100) Code : 9195757932619478
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
[3140]Unlocking target...please wait
  • Unlock finished.
    [1]Unlock finished.
    CHK updated ok.
    Wait untill phone will start charging.[/b]
    All done.