Facil y sencillo.
1.-
Celular apagado.
2.- Abrir
NCK AndroidMTK.3.- En
phone Setting elegir 0-By CPU y MT6571_EMMC.
4.- Ir a la pestaña
FRP-PATTERN-PRIVACY-RESET.
5.- Dar clici en
Reset FRP.
6.- Conectar el celular y esperar como unos 5 segundos y listo.
CitarExe version: NCKBox AndroidMTK 1.8.8.4
Selected model: MT6571_EMMC
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 1.
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (57Gb+4096Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 34:00:00:00:00:00:00:00
EMMC CID: 8801034E436172 : 000000000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ced00000 [7.231 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Checking data, wait...
Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.