0 Usuarios y 1 Visitante están viendo este tema.
Selected connection metod: FLASH Mode Exe version: NCKDongle AndroidMTK 2.5.9.1 Selected model: OT-5010G Action: Unlock Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : PreLoader USB VCOM Port (COM18) Boot mode: Preloader Using Algo 1. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT6580 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (58Gb+8192Mb) HYNIX 0x483847316505 EMMC FW VERSION: 07:00:00:00:00:00:00:00 EMMC CID: 90014A483847316505 : 00000000000000 EMMC UA SIZE: 0x1d2000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x1d2c00000 [7.293 GB] -Reading GPT Drive OK Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detected : DA USB VCOM Port (COM32) MODEL FROM PROINFO: 5010G-2HUFMX1 SECRO FROM PROINFO: X5E0OF00BS10 OTP IMEI: XXX OTP IMEI: XXX Reading security, wait... SIM[1]: Block1(N): Locked (remain:83) Code : 9980693880413826 Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked SIM[2]: Block1(N): Locked (remain:100) Code : 6162943439546163 Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked [3140]Unlocking target...please wait Unlock finished.[1]Unlock finished. CHK updated ok. Wait untill phone will start charging. All done.