¡¡¡Aporte ZTE A465 Unlock - Liberacion by NCK Dongle (Sin Root)!!!

  • 1 Respuestas
  • 3318 Vistas

0 Usuarios y 1 Visitante están viendo este tema.

*

Zilre

  • *****
  • 1153
  • Administrador / SEO
    • Ver Perfil
- Abrir NCK Android MTK y elegimos el modelo
- Nos vamos a la pestaña Unlock y usamos el metodo FLASH mode


Citar
Selected connection metod: FLASH Mode
 Exe version: NCKBox AndroidMTK 1.8.8.2
 Selected model: Blade A465
 Action: Unlock
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM5)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 Using Algo 2.
 ----------------------------------------------------
 BaseBand CPU :MT6735M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x513732534d42
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15010051373253 : 000000000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 IMEI[1]: ----
 IMEI[2]: ----
 Reading security, wait...
 SIM[1]:
 Block1(N): Unlocked
(remain:5) Code : 12345678
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 SIM[2]:
 Block1(N): Unlocked
(remain:5) Code : 12345678
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 Unlocking target...please wait.
 
  • Unlock finished.
  • [1]Unlock finished.
     CHK updated ok.
     Wait untill phone will start charging.
     All done.

*

Jaqen H'ghar

  • *****
  • 931
  • Valar Morghulis
    • Ver Perfil
Re:¡¡¡Aporte ZTE A465 Unlock - Liberacion by NCK Dongle (Sin Root)!!!
« Respuesta #1 en: Julio 12, 2019, 02:13:30 pm »
Citar
Exe version: NCKBox AndroidMTK 1.9
 Selected model: Zte  Blade A465
 Action: Unlock
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM536)
 Boot mode: Preloader
 BBCHIP: 335 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6735M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x513732534d42
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100513732534D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM554)
 IMEI[1]: ***************
 IMEI[2]: ***************
 Reading security, wait...
 SIM[1]:
 Block1(N): Locked (remain:5) Code : 12345678
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 SIM[2]:
 Block1(N): Unlocked (remain:5) Code : 12345678
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 [2660]Unlocking target...please wait
 
  • Unlock finished.
  • [1]Unlock finished.
     CHK updated ok.
     Wait untill phone will start charging.
     
  • All done.

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26