GSMDEC | Foro de Telefonia celular

¡¡¡Aporte LG SP200 Unlock!!!

0 Usuarios y 1 Visitante están viendo este tema.

Jonhy

  • *****
  • 915
    • Ver Perfil
¡¡¡Aporte LG SP200 Unlock!!!
« en: Enero 17, 2019, 04:57:11 pm »
Instrucciones para LG SP200 Unlock by Octopus Box:

- Primero y antes que cualquier cosa leer EEprom con Octopus
- Segundo escribir en modo Download (con el telefono apagado, presionamos volumen arriba y conectamos USB) este Firmware con Octopus Box: SP20013b_to_X210ULMA10d_for_unlock

  PD. Si marca error al escribir, intenten una y otra ves, hasta que se escriba el Firmware
  PD2. Jamas quiten la bateria del SP200 después de haber intentando escribir el Firmware



Citar
17/01/2019 15:12:18 > Checking data...17/01/2019 15:12:19 > OK
17/01/2019 15:12:19 > Platform: LG MTK
17/01/2019 15:12:19 > Selected port: COM1
17/01/2019 15:12:19 > Selected baudrate: 921600
17/01/2019 15:12:19 > Selected model: SP200
17/01/2019 15:12:19 > Selected USB connection type
17/01/2019 15:12:20 > Please, disconnect cable, reconnect battery, connect P999 cable (with 910k resistor)
17/01/2019 15:12:20 > or
17/01/2019 15:12:20 > Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.
17/01/2019 15:21:38 > Phone found at port COM63
17/01/2019 15:21:42 > Mode: Emergency
17/01/2019 15:21:42 > Initializing flash...17/01/2019 15:21:44 > OK
17/01/2019 15:21:45 > Model ID: LM-X210ULMA
17/01/2019 15:21:45 > Platform: mt6750
17/01/2019 15:21:45 > Android version: 7.1.2
17/01/2019 15:21:45 > SW version: LMX210ULMAAT-00-V10d-LAO-COM-MAR-16-2018-ARB00+0
17/01/2019 15:21:45 > LAF Version: 1.1
17/01/2019 15:21:45 > Product ID: CT69S171206001994
17/01/2019 15:21:45 > IMEI:
17/01/2019 15:21:45 > Target operator: LAO
17/01/2019 15:21:45 > Hardware: rev_10
17/01/2019 15:21:45 > Battery level: 50%
17/01/2019 15:21:45 > Reading partitions...17/01/2019 15:21:45 > OK
17/01/2019 15:21:47 > Checking security...
17/01/2019 15:21:47 > offs: 00800000
17/01/2019 15:21:47 > Read 00800000...
17/01/2019 15:21:47 > Checking security passed!
17/01/2019 15:21:47 > --------------------------------------------------------------------------------
17/01/2019 15:21:47 > IMEI: XXX
17/01/2019 15:21:47 > MEID: XXX
17/01/2019 15:21:47 > Bluetooth address: B4:F7:A1:57:A7:BD
17/01/2019 15:21:47 > Wi-Fi MAC address: B4:F7:A1:FC:DB:19
17/01/2019 15:21:47 > SPC: 124610
17/01/2019 15:21:47 > --------------------------------------------------------------------------------
17/01/2019 15:21:47 > Reading security area...17/01/2019 15:21:47 > OK
17/01/2019 15:21:47 > Backup saved to "SP200_XXX_17-01-2019_15-21-47.EEP"
17/01/2019 15:21:47 > --------------------------------------------------------------------------------
17/01/2019 15:21:47 > Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your computer during the flashing!
17/01/2019 15:21:47 > --------------------------------------------------------------------------------
17/01/2019 15:22:00 > Opening "SP20013b_to_X210ULMA10d_for_unlock.oct"...17/01/2019 15:22:00 > OK
17/01/2019 15:22:00 > Setting options...17/01/2019 15:22:02 > OK
17/01/2019 15:22:02 > Selecting firmware partitions...17/01/2019 15:22:04 > OK
17/01/2019 15:22:04 > Selected default partitions!
17/01/2019 15:22:04 > Reading partitions...17/01/2019 15:22:04 > OK
17/01/2019 15:22:04 > Do you want to format User Data?
17/01/2019 15:22:05 > Sending signature...17/01/2019 15:22:06 > OK
17/01/2019 15:22:06 > Writing preloader...17/01/2019 15:22:09 > OK
17/01/2019 15:22:09 > Writing pgpt...17/01/2019 15:22:09 > OK
17/01/2019 15:22:09 > Writing lk...17/01/2019 15:22:09 > OK
17/01/2019 15:22:09 > Writing lk2...17/01/2019 15:22:10 > OK
17/01/2019 15:22:10 > Writing laf...17/01/2019 15:22:12 > OK
17/01/2019 15:22:12 > Writing boot...17/01/2019 15:22:14 > OK
17/01/2019 15:22:14 > Writing recovery...17/01/2019 15:22:16 > OK
17/01/2019 15:22:16 > Writing logo...17/01/2019 15:22:17 > OK
17/01/2019 15:22:17 > Writing lo_bak_go...17/01/2019 15:22:17 > OK
17/01/2019 15:22:17 > Writing secro...17/01/2019 15:22:17 > OK
17/01/2019 15:22:17 > Writing tee1...17/01/2019 15:22:17 > OK
17/01/2019 15:22:17 > Writing tee2...17/01/2019 15:22:17 > OK
17/01/2019 15:22:17 > Writing rct...17/01/2019 15:22:18 > OK
17/01/2019 15:22:18 > Writing factory...17/01/2019 15:22:18 > OK
17/01/2019 15:22:18 > Writing efuse...17/01/2019 15:22:18 > OK
17/01/2019 15:22:18 > Writing md1img...17/01/2019 15:22:20 > OK
17/01/2019 15:22:20 > Writing md1dsp...17/01/2019 15:22:20 > OK
17/01/2019 15:22:20 > Writing md1arm7...17/01/2019 15:22:21 > OK
17/01/2019 15:22:21 > Writing md3img...17/01/2019 15:22:21 > OK
17/01/2019 15:22:21 > Writing system...17/01/2019 15:30:19 > OK
17/01/2019 15:30:19 > Writing lafbak...17/01/2019 15:30:22 > OK
17/01/2019 15:30:22 > Writing ftm...17/01/2019 15:30:23 > OK
17/01/2019 15:30:23 > Writing cache...17/01/2019 15:30:25 > OK
17/01/2019 15:30:25 > Writing OP...17/01/2019 15:30:45 > OK
17/01/2019 15:30:45 > Writing userdata...17/01/2019 15:31:17 > OK
17/01/2019 15:31:17 > Formating RCT...17/01/2019 15:31:21 > OK
17/01/2019 15:31:21 > Finalizing...17/01/2019 15:31:24 > OK
17/01/2019 15:31:24 > Performed by 2.9.1 Software version.
17/01/2019 15:31:24 > Elapsed Time: 0:19:05


- Tercero escribir EEprom, y listo amigos[/b]



*****************************************************

Ahora bien si despues de terminar el proceso el telefono se reinicia constantemente vamos a escribir el Firmware SP200.kdz con LGUP en modo Chiperase y esperar que termine.

Si es pertinente escribimos el EEprom y Listo...




actualizando el tema con mas detalles
« Última modificación: Enero 17, 2019, 05:11:45 pm por Jonhy »

Jonhy

  • *****
  • 915
    • Ver Perfil
Re:¡¡¡Aporte LG SP200 Unlock!!!
« Respuesta #1 en: Enero 17, 2019, 05:02:41 pm »
Para que LGUP habilite la opción ChipErase debemos ejecutar como administrador SetDev y SetUser de LGUP, y nos permitirá elegir la opción ChipErase.

Elegimos el archivo indicado antes (SP200.kdz) y lo escribimos.


 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23