¡¡¡Aporte Alcatel 5010S Unlock - Liberación by Nck Dongle!!!

  • 1 Respuestas
  • 1415 Vistas

0 Usuarios y 1 Visitante están viendo este tema.

*

Zilre

  • *****
  • 1058
  • Administrador / SEO
    • Ver Perfil
¡¡¡Aporte Alcatel 5010S Unlock - Liberación by Nck Dongle!!!
« en: Diciembre 04, 2017, 05:23:24 pm »
- Abrir Android Mtk NCK y elegimos el modelo en cuestión y solo Unlock mediante Flash Mode

Citar
Selected connection metod: FLASH Mode
 Exe version: NCKBox AndroidMTK 1.8.8.3
 Selected model: OT-5010S
 Action: Unlock
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 Using Algo 1.
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
 EMMC FW VERSION: 06:00:00:00:00:00:00:00
 EMMC CID: 150100464E5832 : 000000000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 MODEL FROM PROINFO: 5010S-2VUFMX1
 SECRO FROM PROINFO: X5E0OF00BS10
 OTP IMEI:
 OTP IMEI:
 Reading security, wait...
 SIM[1]:
 Block1(N): Locked (remain:100) Code : 0959584467901623
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 SIM[2]:
 Block1(N): Locked (remain:100) Code : 5012173894527032
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 Unlocking target...please wait.
 
  • Unlock finished.
  • [1]Unlock finished.
     Wait untill phone will start charging.
     All done.

*

Jaqen H'ghar

  • *****
  • 930
  • Valar Morghulis
    • Ver Perfil
Re:¡¡¡Aporte Alcatel 5010S Unlock - Liberación by Nck Dongle!!!
« Respuesta #1 en: Agosto 27, 2018, 07:50:06 pm »
Citar
Selected connection metod: FLASH Mode
 Exe version: NCKBox AndroidMTK 1.8.9.2
 Selected model: OT-5010S
 Action: Unlock

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM132)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x463732324d42
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100463732324D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 -Reading GPT Drive OK
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM445)
 MODEL FROM PROINFO: 5010S-2AUFMX1
 SECRO FROM PROINFO: X5E0OF00BS10
 OTP IMEI: ***************
 OTP IMEI: ***************
 Reading security, wait...
 SIM[1]:
 Block1(N): Locked (remain:84) Code : 5394931482209758
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 SIM[2]:
 Block1(N): Locked (remain:100) Code : 9195757932619478
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 [3140]Unlocking target...please wait
 
  • Unlock finished.
  • [1]Unlock finished.
     CHK updated ok.
     Wait untill phone will start charging.[/b]
     All done.

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24