¡¡¡Aporte Motorola Xt1756 (Moto C) Unlock - Liberacion By NCK!!!

  • 2 Respuestas
  • 9045 Vistas

0 Usuarios y 1 Visitante están viendo este tema.

*

Jaqen H'ghar

  • *****
  • 934
  • Valar Morghulis
    • Ver Perfil
1.- Activar Depuración USB y modo OEM.
2.- Abiri el modulo NCK Andorid MTK.
3.- Elegir la marca Motorola y elegir el modelo.
4.- Dar en leer códigos .
5.- Conectar el celular apagado y esperar a que los genere.


Citar
Selected connection metod: FLASH Mode
 Exe version: NCKBox AndroidMTK 1.8.8.3
 Selected model: XT1756
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.

 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 Using Algo 2.
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
 EMMC FW VERSION: a5:00:00:00:00:00:00:00
 EMMC CID: 90014A48384734 : 000000000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 IMEI[1]: ***************
 IMEI[2]: 000000000000000
 Reading security, wait...
 SIM[1]:
Block1(N): Locked (remain:96) Code : 2720076277031038
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 SIM[2]:
 Block1(N): Unlocked (remain:5) Code : 
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 Please note, some firmwares can display wrong codes.
 Some firmwares can be hardlocked.
 If this happen, perform direct unlock.
 If direct unlock fail,use reset package from support.
 If reset package not exist in support,request help in forum.
Wait untill phone will start charging.
 All done
.

PD: Si no detecta el celular apagado lo conectan en modo fastboot (boton abajo y power ) esperas a que instale el driver. Una vez instalado le quitas la pila y vuelven a hacer el proceso

*

Zilre

  • *****
  • 1196
  • Administrador / SEO
    • Ver Perfil
Re:¡¡¡Aporte Motorola Xt1756 (Moto C) Unlock - Liberacion By NCK!!!
« Respuesta #1 en: Enero 10, 2018, 10:33:33 am »
otro logo mas:

Citar
Selected connection metod: FLASH Mode
 Exe version: NCKBox AndroidMTK 1.8.8.3
 Selected model: XT1756
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 Using Algo 2.
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
 EMMC FW VERSION: a5:00:00:00:00:00:00:00
 EMMC CID: 90014A48384734 : 000000000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 IMEI[1]: ---
 IMEI[2]: 000000000000000
 Reading security, wait...
 SIM[1]:
 Block1(N): Locked (remain:99) Code : 6489971629867942
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 SIM[2]:
 Block1(N): Unlocked (remain:5) Code : 
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 Please note, some firmwares can display wrong codes.
 Some firmwares can be hardlocked.
 If this happen, perform direct unlock.
 If direct unlock fail,use reset package from support.
 If reset package not exist in support,request help in forum.
 Wait untill phone will start charging.
 All done.

*

marcomax

  • *
  • 1
  • User GsmArena
    • Ver Perfil
Re:¡¡¡Aporte Motorola Xt1756 (Moto C) Unlock - Liberacion By NCK!!!
« Respuesta #2 en: Febrero 25, 2019, 10:49:33 am »
Excelente aporte colega, salio al 100

1.- Activar Depuración USB y modo OEM.
2.- Abiri el modulo NCK Andorid MTK.
3.- Elegir la marca Motorola y elegir el modelo.
4.- Dar en leer códigos .
5.- Conectar el celular apagado y esperar a que los genere.


Citar
Selected connection metod: FLASH Mode
 Exe version: NCKBox AndroidMTK 1.8.8.3
 Selected model: XT1756
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.

 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 Using Algo 2.
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
 EMMC FW VERSION: a5:00:00:00:00:00:00:00
 EMMC CID: 90014A48384734 : 000000000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 IMEI[1]: ***************
 IMEI[2]: 000000000000000
 Reading security, wait...
 SIM[1]:
Block1(N): Locked (remain:96) Code : 2720076277031038
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 SIM[2]:
 Block1(N): Unlocked (remain:5) Code : 
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 Please note, some firmwares can display wrong codes.
 Some firmwares can be hardlocked.
 If this happen, perform direct unlock.
 If direct unlock fail,use reset package from support.
 If reset package not exist in support,request help in forum.
Wait untill phone will start charging.
 All done
.

PD: Si no detecta el celular apagado lo conectan en modo fastboot (boton abajo y power ) esperas a que instale el driver. Una vez instalado le quitas la pila y vuelven a hacer el proceso

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28