¡¡¡Aporte Motorola XT1764 Unlock (Liberacion) by NCK Box!!!

  • 0 Respuestas
  • 1259 Vistas

0 Usuarios y 1 Visitante están viendo este tema.

*

Zilre

  • *****
  • 1050
  • Administrador / SEO
    • Ver Perfil



Citar
Selected connection metod: FLASH Mode
 Exe version: NCKDongle AndroidMTK 2.5.8.7
 Selected model: MT6737M
 Action: Unlock
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : PreLoader USB VCOM Port (COM3)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42
 EMMC FW VERSION: 0d:00:00:00:00:00:00:00
 EMMC CID: 150100514531334D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : DA USB VCOM Port (COM5)
 -Reading GPT Drive OK
 IMEI[1]: 355640081320982
 IMEI[2]: 355640081320982
 Reading security, wait...
 SIM[1]:
 Block1(N): Unlocked (remain:100) Code : 4186098258463206
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 SIM[2]:
 Block1(N): Unlocked (remain:100) Code : 12345678
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 [3580]Unlocking target...please wait
 
  • Unlock finished.
  • [1]Unlock finished.
     CHK updated ok.
     Wait untill phone will start charging.
     All done.



 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24