0 Usuarios y 2 Visitantes están viendo este tema.
Selected connection metod: FLASH Mode Exe version: NCKDongle AndroidMTK 2.5.8.7 Selected model: Ascend Y221-U03 Action: Unlock Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : PreLoader USB VCOM Port (COM3) Boot mode: Preloader Using Algo 1. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT6572 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 512 MB DRAM ---------------------------------------------------- EMMC: (29Gb+4096Mb) HYNIX 0x483447316404 EMMC FW VERSION: 05:00:00:00:00:00:00:00 EMMC CID: 90014A483447316404 : 00000000000000 EMMC UA SIZE: 0xe9000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0xe9c00000 [3.652 GB] Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detected : DA USB VCOM Port (COM5) IMEI[1]: 865247021550505 IMEI[2]: 865247021550505 Reading security, wait... SIM[1]: Block1(N): Unlocked (remain:255) Code : 11119673 Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked SIM[2]: Block1(N): Unlocked (remain:255) Code : 12345678 Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked [3260]Unlocking target...please wait Unlock finished.[1]Unlock finished. CHK updated ok. Wait untill phone will start charging. All done.