0 Usuarios y 1 Visitante están viendo este tema.
Welcome to Octoplus FRP Tool v.1.2.9.0Platform: MOTOROLASelected model: XT1766Put the phone into Factory Mode: 1. Power phone OFF; 2. Press and hold "Vol-" + "Power" buttons; 3. Select Factory Mode, then confirm your selection; 4. Wait until the phone Power ON; 5. Connect USB cable.Searching for a phone. Please wait...Phone found.Reading info...Phone model: 8940.gen:Firmware released date: Oct 24 2017Firmware released time: 17:18:40Firmware compiled date: May 07 2017Firmware compiled time: 23:00:00SW version: MPSS.TA.2.3.c1-00280-8953_GEN_PACK-1.97293.1.98137.1Enabling "USB Debugging" mode...Put the phone in Factory Mode:1. Disconnect USB cable;2. Power OFF the phone;3. Press "Vol-" and "Power" buttons;4. Select Factory Mode then confirm your selection;5. Wait until phone is power ON and connect USB Cable;6. Install necesarry drivers then press "OK" buttonPlease, press "OK" button on the phone to allow USB debugging..Searching for a phone (waiting for ADB device)...Phone found.Reading info...Phone model: motorola Moto E (4)SW version: NCQ26.69-56Date: Thu Oct 26 04:14:13 CDT 2017Android version: 7.1.1Baseband M8920_15000.280.06.58.02R PERRY_NA_CA_CUSTDetected phone model: XT1766Resetting FRP lock..FRP lock is successfully reseted!Performed by 1.2.9.0 Software version.