0 Usuarios y 1 Visitante están viendo este tema.
Welcome to Octoplus FRP Tool v.220.127.116.11Platform: MOTOROLASelected model: XT1641Put the phone into Factory Mode: 1. Power phone OFF; 2. Press and hold "Vol-" + "Power" buttons; 3. Select Factory Mode, then confirm your selection; 4. Wait until the phone Power ON; 5. Connect USB cable.Searching for a phone. Please wait...Phone found.Reading info...Phone model: 8952.genFirmware released date: May 31 2017Firmware released time: 06:30:21Firmware compiled date: May 17 2017Firmware compiled time: 02:00:00SW version: MPSS.TA.2.1.c3-00025-8976_GEN_PACK-1.80110.1.99393.1Enabling "USB Debugging" mode...Searching for a phone. Please wait...Enabling "USB Debugging" mode...Put the phone in Factory Mode:1. Disconnect USB cable;2. Power OFF the phone;3. Press "Vol-" and "Power" buttons;4. Select Factory Mode then confirm your selection;5. Wait until phone is power ON and connect USB Cable;6. Install necesarry drivers then press "OK" buttonPlease, press "OK" button on the phone to allow USB debugging..Searching for a phone (waiting for ADB device)...Phone found.Reading info...Phone model: motorola Moto G (4)SW version: NPJS25.93-14-10Date: Mon Aug 28 09:20:48 CDT 2017Android version: 7.0Baseband M8952_70030.25.03.62.01R ATHENE_LATAM_CUSTDetected phone model: XT1641Resetting FRP lock..FRP lock is successfully reseted!Performed by 18.104.22.168 Software version.