¡¡¡Aporte Huawei Y600-U151 (Rom - Firmware - Flash) Funcional!!!

[Zilre]

Instrucciones:

- Descomprimir la ROM
- Abrir NCK o SP Flash Tool
- Cargar el scatter.txt
- Desmarcar el preloader
- Y escribir la ROM

Flash files count is :10
Action : Firmware update.
Selected Model: 0-By CPU: ELBRUS
Exe version: NCKDongle AndroidMTK 2.5.8.7
Scenario:

• Safe Flash
  Reinsert phone battery.
  Battery must be charged.
  Phone must be off with battery inside.
  Please insert USB cable now...
  Detected : PreLoader USB VCOM Port (COM3)
  Boot mode: Preloader
  Using Algo 1.
  Phone detected...Please wait
  Sending DA agent, please wait...
  ----------------------------------------------------
  BaseBand CPU :MT6572
  BaseBand CPU Secure Version : FF
  BaseBand CPU Bootloader Version : 01
  ----------------------------------------------------
  INT RAM: 128 KB SDRAM
  EXT RAM: 512 MB  DRAM
  ----------------------------------------------------
  EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
  EMMC FW VERSION: 05:00:00:00:00:00:00:00
  EMMC CID: 90014A483447316404 : 00000000000000
  EMMC UA SIZE: 0xe9000000     
  BOOT STYLE: EMMC BOOT
  FULL LENGTH: 0xe9c00000       [3.652 GB]
  Status: USB_HIGH_SPEED
  Detecting high speed port, wait......
  If driver not installed, install high speed port driver.
  If not need high speed port, disable it.
  After repeat opperation.
  Detected : DA USB VCOM Port (COM5)
  Warning, flashing preloader disabled!
  If you change android version, preloader must be flashed.
  Flash EMMC Algo Start.
  Preloader saved in firmware directory.
  Starting flash.
  Download firmware to flash now...
  Wait untill phone will start charging.
  All done.